I made this succulent wall art as a gift for one of our friends. I bought this small square shaped table top succulent arrangement from Michael’s and had rest of the stuff needed for this project in my craft stash.
I painted the square frame white. While it was drying, I cut a 1/8 inch thick piece of plywood to fit into the frame opening, and then modpodged the black burlap to it.
When dry, I applied the second coat of Modpodge mixed with a little glitter and let it dry for about 2 hours. Modpodge made the burlap stiff after drying. I then trimmed the burlap edges flush with the plywood.
Then it was time to fit the plywood into the frame. I did that with the help of 6×3/4 screws.
I then hot glued the succulent arrangement in the middle of the frame. To make it a bit more lively, I sat there a small bird also.
I think this bird takes this wall art a notch higher.

Leave a Reply